Türschlosselektronik-secuENTRY Einzelkomponenten | ENTRY 7174 RFID EXTENDER
ENTRY 7174 RFID EXTENDER
ENTRY 7174 RFID EXTENDER
Version:
Version
Quantity:
pc
Opening doors, barriers or gates with the wall reader
Conveniently open the entrance door from a distance or the garage without getting out of the car? This is possible without any problems. Because with the secuENTRY 7174 RFID Extender wall reader, an electronic door lock from BURG-WÄCHTER becomes even more flexible. The wall reader acts as a kind of remote control. If it receives the corresponding signal to open or close via the passive transponder, it passes it on to the electronic door lock. Accordingly, you open the door, the garage door or the barrier. The wall reader transponder extender from BURG-WÄCHTER was awarded the PLUS X AWARD 2020 for high quality, ease of use and functionality!secuENTRY 7174 RFID extender is linked to the door lock in just a few seconds
The link between the wall reader and the secuENTRY door lock is very simple: You simply hold a passive transponder registered on the electronic door lock or in the secuENTRY software to the secuENTRY 7174 extender. If a signal tone sounds, the device is ready for use. The wall reader now transmits the signal to the door lock and acts as a remote opener. The correct position for placing the passive transponder is marked by the BURG-WÄCHTER sticker on the front of the wall reader. The maximum range between the wall reader and the secuENTRY door lock is 4 metres. Operation is also very simple: You only have to place the authorised transponder briefly on the wall reader until a signal tone sounds.Device signals low battery
If the battery in the secuENTRY 7174 transponder extender needs to be replaced, the device signals this with five beeps in succession. Incidentally, the battery can be replaced in just a few steps: Use the covered screws to loosen the wall reader. Then remove the back from the housing using four screws. You can then open the wall reader and replace the inserted battery (model CR 123 A) with a new one. Of course, data is transmitted via secure AES encryption. This is done via the modern Bluetooth standard 5.2 LE.The secuENTRY transponder extender can be used with the following versions and higher
secuENTRY and secuENTRY pro as of software version 1.7secuENTRY easy / secuENTRY pro 7100 and secuENTRY easy plus as of software version 1.3Relay secuENTRY pro 7071 as of software version 1.4- • Wandleser zur Öffnung von Türen • secuENTRY Passivtransponder erteilt dem Wandleser das Öffnungssignal• Maximale Funk-Reichweite (Bluetooth, AES-verschlüsselt) zwischen Wandleser und secuENTRY Türschloss: ca. 4 m• Akustisches Feedback • Spannungsversorgung: CR123A• Schutzklasse IP65
Number of batteries
1x
Product outer width
60,00 mm
Product outer height
65,00 mm
Product outer depth
55,00 mm
Verpackungseinheit
1.00 Stk
Weight
0,110
kg
Fingerscan
no
Communication (Bluetooth/radio)
Bluetooth 5.2
Battery type
CR 123A
Main material
Plastic
Incl. fixing material
no
Emergency lock function
no
Pincode
no
Optional transponder
none
Weather protection class
none
Packaging width mm
95,00 mm
Packaging depth mm
60,00 mm
Type of packaging (carton, blister)
colour carton
Matching key blank
OUTDATED
Videos
Instructions
Anleitungen_BW_BA_7174_RFID-EXTENDER_DE_297x210mm_RZ1_4003482501740_Druck_2024-08-08_22-20.pdf Anleitungen_BW_BA_7174_RFID-EXTENDER_DE_297x210mm_RZ1_4003482501740_Web_2024-08-08_22-20.pdf Anleitungen_BW_BA_7174_RFID-EXTENDER_EN_297x210mm_RZ1_4003482501740_Druck_2024-08-08_22-20.pdf Anleitungen_BW_BA_7174_RFID-EXTENDER_EN_297x210mm_RZ1_4003482501740_Web_2024-08-08_22-20.pdf Anleitungen_BW_BA_7174_RFID-EXTENDER_FR_297x210mm_RZ1_4003482501740_Druck_2024-08-08_22-20.pdf Anleitungen_BW_BA_7174_RFID-EXTENDER_FR_297x210mm_RZ1_4003482501740_Web_2024-08-08_22-20.pdf Anleitungen_BW_BA_7174_RFID-EXTENDER_NL_297x210mm_RZ1_4003482501740_Druck_2024-08-08_22-20.pdf Anleitungen_BW_BA_7174_RFID-EXTENDER_NL_297x210mm_RZ1_4003482501740_Web_2024-08-08_22-20.pdf
Declaration of Conformity
