FAQ's for SNC / BWNC cameras
SNC / BWNC cameras
Live image display in Edge Browser instead of Internet Explorer
Live image displayin the Edge Browser (PDF 381.20 kB)
Syntax
rtsp://<username>:<password>@<ip>:<port>/cam/realmonitor?channel=<ChannelNo>&subtype=<typeNo>
Description
Get real-time media stream.
Example
We request the extra stream 1 of channel 1, the URL is:
rtsp://admin:password@192.168.0.100:554/cam/realmonitor?channel=1&subtype=1
Success Return
media stream data
Comment
<username>: a valid user’s username.
<password>: user’s password.
< ip>: the IP address of the video product.
<port >: the default port is 554. It can be omitted.
<ChannelNo>: integer, the video channel index which starts from 1.
<typeNo>: the stream type. The <typeNo> of main stream is 0, extra stream 1 is 1, extra stream 2 is 2. The extra stream counts can be obtained in GetMaxExtraStreamCounts. If the stream does not exist or not enabled, response will be error.
The IP Camera supports both TCP and UDP transmission forms.
It also supplies basic authentication and digest authentication ways. The authentication process is similar with Authentication. Please check the cameras security settings.
Syntax
http://<ip>:<port>/cgi-bin/mjpg/video.cgi?subtype=<typeNo>
Description
Get MJPEG media stream.
Example
We request the extra stream 1, the URL is:
http://192.168.178.126/cgi-bin/mjpg/video.cgi?subtype=1
We request the main stream, the URL is:
http://192.168.178.126/cgi-bin/mjpg/video.cgi
NOTE: CHECK IF YOUR CAMERA SUPPORTS MJPEG ON THE REQUESTED STREAM BEFORE
Success Return
media stream data
Comment
< ip>: the IP address of the video product.
<port >: the default port is 554. It can be omitted.
<typeNo>: the stream type. The <typeNo> of main stream is 0, extra stream 1 is 1, extra stream 2 is 2. The extra stream counts can be obtained in GetMaxExtraStreamCounts. If the stream does not exist or not enabled, response will be error.
Syntax
http://<ip>:<port>/cgi-bin/snapshot.cgi?channel=1
Description
Get Snapshot
Comment
< ip>: the IP address of the video product.
<port >: the default port is 554. It can be omitted.
Open the encoder settings of your camera
Set ALL streams to H.264.
Switch to the audio settings.
Activate the audio setting and set the encoding to AAC.
Open your YouTube channel and click on Start livestream in the top right-hand corner
Copy the stream URL (1), e.g. into a writing program.
Add a / to the end of the text.
Then copy the stream key to the end.
Example:rtmp://a.rtmp.youtube.com/live2/STREAMKEY
Open your camera menu and select Settings - Network - Remote connection - RTMP.
Activate the function, select the stream type and select User-defined under Address type.
Transfer the URL incl. / and stream key from the text file to the input field under User-defined.
Click on Save.
Wait until the live image is displayed on the YouTube channel. The video is now live on your channel. Good luck with your livestream.
SanDiskULTRA © XCI e.g. 32GB, 64GB, 128GB, 256GB - SanDiskExtrem © XCI 64GB, 128GB, 256GBNote:Please note the minimum write speed of the systems, this must be higher than the streaming rate of the recording stream. It is therefore advisable to use at least a Class 10 (C10) card. Class 3 (U3) or Class 30 (V30) should be used for high-resolution systems
In folgendem Menüpunkt können Sie den Kompatibilitätsmodus aktiveren, um das Gerät mit 3.Anbieter Systemen zu betreiben.
Privatzonen
Help around IP cameras (older models)
Video
Integration into other trades
Syntax
rtsp://<username>:<password>@<ip>:<port>/cam/realmonitor?channel=<ChannelNo>&subtype=<typeNo>
Description
Get real-time media stream.
Example
We request the extra stream 1 of channel 1, the URL is:
rtsp://admin:password@192.168.0.100:554/cam/realmonitor?channel=1&subtype=1
Success Return
media stream data
Comment
<username>: a valid user’s username.
<password>: user’s password.
< ip>: the IP address of the video product.
<port >: the default port is 554. It can be omitted.
<ChannelNo>: integer, the video channel index which starts from 1.
<typeNo>: the stream type. The <typeNo> of main stream is 0, extra stream 1 is 1, extra stream 2 is 2. The extra stream counts can be obtained in GetMaxExtraStreamCounts. If the stream does not exist or not enabled, response will be error.
The IP Camera supports both TCP and UDP transmission forms.
It also supplies basic authentication and digest authentication ways. The authentication process is similar with Authentication. Please check the cameras security settings.
Syntax
http://<ip>:<port>/cgi-bin/mjpg/video.cgi?subtype=<typeNo>
Description
Get MJPEG media stream.
Example
We request the extra stream 1, the URL is:
http://192.168.178.126/cgi-bin/mjpg/video.cgi?subtype=1
We request the main stream, the URL is:
http://192.168.178.126/cgi-bin/mjpg/video.cgi
NOTE: CHECK IF YOUR CAMERA SUPPORTS MJPEG ON THE REQUESTED STREAM BEFORE
Success Return
media stream data
Comment
< ip>: the IP address of the video product.
<port >: the default port is 554. It can be omitted.
<typeNo>: the stream type. The <typeNo> of main stream is 0, extra stream 1 is 1, extra stream 2 is 2. The extra stream counts can be obtained in GetMaxExtraStreamCounts. If the stream does not exist or not enabled, response will be error.
Syntax
http://<ip>:<port>/cgi-bin/snapshot.cgi?channel=1
Description
Get Snapshot
Comment
< ip>: the IP address of the video product.
<port >: the default port is 554. It can be omitted.
Beispielkonfiguration der IVA "Zonenüberwachung"und "Stolperdraht"
More questions
Here are brief instructions on how to reset the SNC-431FEIF to factory settings.
Instructions:
Reset SNC-431FEIF (PDF 611 kb)